nginx: normalize installation (docs and script)s over all distros

This is the revision of the documentation about the varous nginx installation
variants.  It also implements the nginx installation scripts for morty and
filtron.

Signed-off-by: Markus Heiser <markus.heiser@darmarit.de>

docs/admin/filtron.rst

@@ -158,6 +158,12 @@ of:
 Route request through filtron
 =============================
 
+.. sidebar:: further reading
+
+   - :ref:`filtron.sh overview`
+   - :ref:`installation nginx`
+   - :ref:`installation apache`
+
 Filtron can be started using the following command:
 
 .. code:: sh
@@ -171,15 +177,24 @@ Use it along with ``nginx`` with the following example configuration.
 
 .. code:: nginx
 
-   location / {
+   # https://example.org/searx
+
+   location /searx {
        proxy_pass         http://127.0.0.1:4004/;
 
        proxy_set_header   Host             $http_host;
+       proxy_set_header   Connection       $http_connection;
        proxy_set_header   X-Real-IP        $remote_addr;
        proxy_set_header   X-Forwarded-For  $proxy_add_x_forwarded_for;
        proxy_set_header   X-Scheme         $scheme;
+       proxy_set_header   X-Script-Name    /searx;
    }
 
+   location /searx/static {
+       /usr/local/searx/searx-src/searx/static;
+   }
+
+
 Requests are coming from port 4004 going through filtron and then forwarded to
 port 8888 where a searx is being run. For a complete setup see: :ref:`nginx
 searx site`.

docs/admin/installation-nginx.rst

@@ -159,14 +159,22 @@ Started wiki`_ is always a good resource *to keep in the pocket*.
 
       .. code:: nginx
 
-         location / {
+	 # https://example.org/searx
-             proxy_pass         http://127.0.0.1:4004/;
 
-             proxy_set_header   Host             $http_host;
+	 location /searx {
-             proxy_set_header   X-Real-IP        $remote_addr;
+	     proxy_pass         http://127.0.0.1:4004/;
-             proxy_set_header   X-Forwarded-For  $proxy_add_x_forwarded_for;
+
-             proxy_set_header   X-Scheme         $scheme;
+	     proxy_set_header   Host             $http_host;
-         }
+	     proxy_set_header   Connection       $http_connection;
+	     proxy_set_header   X-Real-IP        $remote_addr;
+	     proxy_set_header   X-Forwarded-For  $proxy_add_x_forwarded_for;
+	     proxy_set_header   X-Scheme         $scheme;
+	     proxy_set_header   X-Script-Name    /searx;
+	 }
+
+	 location /searx/static {
+	     /usr/local/searx/searx-src/searx/static;
+	 }
 
 
       2. Configure reverse proxy for :ref:`morty <searx morty>`, listening on
@@ -174,10 +182,13 @@ Started wiki`_ is always a good resource *to keep in the pocket*.
 
       .. code:: nginx
 
-         location /morty {
+	 # https://example.org/morty
+
+	 location /morty {
              proxy_pass         http://127.0.0.1:3000/;
 
              proxy_set_header   Host             $http_host;
+             proxy_set_header   Connection       $http_connection;
              proxy_set_header   X-Real-IP        $remote_addr;
              proxy_set_header   X-Forwarded-For  $proxy_add_x_forwarded_for;
              proxy_set_header   X-Scheme         $scheme;
@@ -197,7 +208,7 @@ Started wiki`_ is always a good resource *to keep in the pocket*.
              image_proxy : True
 
 
-   .. group-tab:: proxy or uWSGI
+   .. group-tab:: proxy or uWSGI 
 
       Be warned, with this setup, your instance isn't :ref:`protected <searx
       filtron>`.  Nevertheless it is good enough for intranet usage and it is a
@@ -208,15 +219,17 @@ Started wiki`_ is always a good resource *to keep in the pocket*.
 
       .. code:: nginx
 
-          location / {
+	 # https://hostname.local/
-              proxy_pass http://127.0.0.1:8888;
 
-              proxy_set_header Host $host;
+	 location / {
-              proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
+	     proxy_pass http://127.0.0.1:8888;
-              proxy_set_header X-Scheme $scheme;
+
-              proxy_set_header X-Script-Name /searx;
+             proxy_set_header Host $host;
-              proxy_buffering off;
+             proxy_set_header Connection       $http_connection;
-          }
+             proxy_set_header X-Forwarded-For  $proxy_add_x_forwarded_for;
+             proxy_set_header X-Scheme         $scheme;
+             proxy_buffering                   off;
+         }
 
       Alternatively you can use the `uWSGI support from nginx`_ via unix
       sockets.  For socket communication, you have to activate ``socket =
@@ -234,8 +247,8 @@ Started wiki`_ is always a good resource *to keep in the pocket*.
       .. code:: nginx
 
          server {
-             # replace example.org with your server's public name
+             # replace hostname.local with your server's name
-             server_name example.org;
+             server_name hostname.local;
 
              listen 80;
              listen [::]:80;
@@ -245,7 +258,7 @@ Started wiki`_ is always a good resource *to keep in the pocket*.
                  uwsgi_pass unix:/run/uwsgi/app/searx/socket;
              }
 
-	     root /usr/local/searx/searx-src/searx;
+             root /usr/local/searx/searx-src/searx;
              location /static { }
          }
 
@@ -254,10 +267,10 @@ Started wiki`_ is always a good resource *to keep in the pocket*.
 
       .. code:: bash
 
-	 mkdir -p /run/uwsgi/app/searx/
+         mkdir -p /run/uwsgi/app/searx/
-	 sudo -H chown -R searx:searx /run/uwsgi/app/searx/
+         sudo -H chown -R searx:searx /run/uwsgi/app/searx/
 
-   .. group-tab:: proxy at subdir URL
+   .. group-tab:: \.\. at subdir URL
 
       Be warned, with these setups, your instance isn't :ref:`protected <searx
       filtron>`.  The examples are just here to demonstrate how to export the
@@ -265,19 +278,22 @@ Started wiki`_ is always a good resource *to keep in the pocket*.
 
       .. code:: nginx
 
-          location /searx {
+	 # https://hostname.local/searx
-              proxy_pass http://127.0.0.1:8888;
 
-              proxy_set_header Host $host;
+         location /searx {
-              proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
+             proxy_pass http://127.0.0.1:8888;
-              proxy_set_header X-Scheme $scheme;
-              proxy_set_header X-Script-Name /searx;
-              proxy_buffering off;
-          }
 
-          location /searx/static {
+             proxy_set_header Host $host;
-              alias /usr/local/searx/searx-src/searx/static;
+             proxy_set_header Connection       $http_connection;
-          }
+             proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
+             proxy_set_header X-Scheme $scheme;
+             proxy_set_header X-Script-Name /searx;
+             proxy_buffering off;
+         }
+
+         location /searx/static {
+             alias /usr/local/searx/searx-src/searx/static;
+         }
 
       The ``X-Script-Name /searx`` is needed by the searx implementation to
       calculate relative URLs correct.  The next example shows a uWSGI
@@ -286,15 +302,17 @@ Started wiki`_ is always a good resource *to keep in the pocket*.
 
       .. code:: nginx
 
-          location /searx/static {
+	 # https://hostname.local/searx
-              alias /usr/local/searx/searx-src/searx;
-          }
 
-          location /searx {
+         location /searx {
-              uwsgi_param SCRIPT_NAME /searx;
+             uwsgi_param SCRIPT_NAME /searx;
-              include uwsgi_params;
+             include uwsgi_params;
-              uwsgi_pass unix:/run/uwsgi/app/searx/socket;
+             uwsgi_pass unix:/run/uwsgi/app/searx/socket;
-          }
+         }
+
+         location /searx/static {
+             alias /usr/local/searx/searx-src/searx;
+         }
 
       For searx to work correctly the ``base_url`` must be set in the
       :origin:`searx/settings.yml`.

utils/filtron.sh

@@ -44,9 +44,8 @@ GO_ENV="${SERVICE_HOME}/.go_env"
 GO_PKG_URL="https://dl.google.com/go/go1.13.5.linux-amd64.tar.gz"
 GO_TAR=$(basename "$GO_PKG_URL")
 
-# Apache Settings
-
 APACHE_FILTRON_SITE="searx.conf"
+NGINX_FILTRON_SITE="searx.conf"
 
 # shellcheck disable=SC2034
 CONFIG_FILES=(
@@ -60,9 +59,7 @@ usage() {
 
     # shellcheck disable=SC1117
     cat <<EOF
-
 usage::
-
   $(basename "$0") shell
   $(basename "$0") install    [all|user|rules]
   $(basename "$0") update     [filtron]
@@ -72,6 +69,7 @@ usage::
   $(basename "$0") inspect    [service]
   $(basename "$0") option     [debug-on|debug-off]
   $(basename "$0") apache     [install|remove]
+  $(basename "$0") nginx      [install|remove]
 
 shell
   start interactive shell from user ${SERVICE_USER}
@@ -92,6 +90,9 @@ option
 apache (${PUBLIC_URL})
   :install: apache site with a reverse proxy (ProxyPass)
   :remove:  apache site ${APACHE_FILTRON_SITE}
+nginx (${PUBLIC_URL})
+  :install: nginx site with a reverse proxy (ProxyPass)
+  :remove:  nginx site ${NGINX_FILTRON_SITE}
 
 filtron rules: ${FILTRON_RULES}
 
@@ -118,8 +119,6 @@ EOF
 }
 
 main() {
-    rst_title "$SERVICE_NAME" part
-
     required_commands \
         sudo install git wget curl \
         || exit
@@ -127,7 +126,7 @@ main() {
     local _usage="unknown or missing $1 command $2"
 
     case $1 in
-        --source-only)  ;;
+        --getenv)  var="$2"; echo "${!var}"; exit 0;;
         -h|--help) usage; exit 0;;
 
         shell)
@@ -143,6 +142,7 @@ main() {
                 *) usage "$_usage"; exit 42;;
             esac ;;
         install)
+            rst_title "$SERVICE_NAME" part
             sudo_or_exit
             case $2 in
                 all) install_all ;;
@@ -187,6 +187,13 @@ main() {
                 remove) remove_apache_site ;;
                 *) usage "$_usage"; exit 42;;
             esac ;;
+        nginx)
+            sudo_or_exit
+            case $2 in
+                install) install_nginx_site ;;
+                remove) remove_nginx_site ;;
+                *) usage "$_usage"; exit 42;;
+            esac ;;
         option)
             sudo_or_exit
             case $2 in
@@ -473,6 +480,51 @@ This removes apache site ${APACHE_FILTRON_SITE}."
 
 }
 
+install_nginx_site() {
+
+    rst_title "Install nginx site $NGINX_FILTRON_SITE"
+
+    rst_para "\
+This installs a reverse proxy (ProxyPass) into nginx site (${NGINX_FILTRON_SITE})"
+
+    ! nginx_is_installed && err_msg "nginx is not installed."
+
+    if ! ask_yn "Do you really want to continue?" Yn; then
+        return
+    else
+        install_nginx
+    fi
+
+    "${REPO_ROOT}/utils/searx.sh" install uwsgi
+
+    SEARX_SRC=$("${REPO_ROOT}/utils/searx.sh" --getenv SEARX_SRC)
+    SEARX_URL_PATH=$("${REPO_ROOT}/utils/searx.sh" --getenv SEARX_URL_PATH)
+    nginx_install_app --variant=filtron "${NGINX_FILTRON_SITE}"
+
+    info_msg "testing public url .."
+    if ! service_is_available "${PUBLIC_URL}"; then
+        err_msg "Public service at ${PUBLIC_URL} is not available!"
+    fi
+}
+
+remove_nginx_site() {
+
+    rst_title "Remove nginx site $NGINX_FILTRON_SITE"
+
+    rst_para "\
+This removes nginx site ${NGINX_FILTRON_SITE}."
+
+    ! nginx_is_installed && err_msg "nginx is not installed."
+
+    if ! ask_yn "Do you really want to continue?" Yn; then
+        return
+    fi
+
+    nginx_remove_site "$FILTRON_FILTRON_SITE"
+
+}
+
+
 rst-doc() {
 
     eval "echo \"$(< "${REPO_ROOT}/docs/build-templates/filtron.rst")\""

utils/lib.sh

@@ -138,6 +138,16 @@ rst_para() {
     fi
 }
 
+die() {
+    echo -e "${_BRed}ERROR:${_creset} ${BASH_SOURCE[1]}: line ${BASH_LINENO[0]}: ${2-died ${1-1}}" >&2;
+    exit "${1-1}"
+}
+
+die_caller() {
+    echo -e "${_BRed}ERROR:${_creset} ${BASH_SOURCE[2]}: line ${BASH_LINENO[1]}: ${FUNCNAME[1]}(): ${2-died ${1-1}}" >&2;
+    exit "${1-1}"
+}
+
 err_msg()  { echo -e "${_BRed}ERROR:${_creset} $*" >&2; }
 warn_msg() { echo -e "${_BBlue}WARN:${_creset}  $*" >&2; }
 info_msg() { echo -e "${_BYellow}INFO:${_creset}  $*" >&2; }
@@ -471,11 +481,7 @@ service_is_available() {
 
     # usage:  service_is_available <URL>
 
-    local URL="$1"
+    [[ -z $1 ]] && die_caller 42 "missing argument <URL>"
-    if [[ -z $URL ]]; then
-        err_msg "service_is_available: missing arguments"
-        return 42
-    fi
 
     http_code=$(curl -H 'Cache-Control: no-cache' \
          --silent -o /dev/null --head --write-out '%{http_code}' --insecure \
@@ -624,6 +630,175 @@ EOF
 }
 
 
+# nginx
+# -----
+
+nginx_distro_setup() {
+    # shellcheck disable=SC2034
+
+    NGINX_DEFAULT_SERVER=/etc/nginx/nginx.conf
+
+    # Including *location* directives from a dedicated config-folder into the
+    # server directive is, what what fedora (already) does.
+    NGINX_APPS_ENABLED="/etc/nginx/default.d"
+
+    # We add a apps-available folder and linking configurations into the
+    # NGINX_APPS_ENABLED folder.  See also nginx_include_apps_enabled().
+    NGINX_APPS_AVAILABLE="/etc/nginx/default.apps-available"
+
+    case $DIST_ID-$DIST_VERS in
+        ubuntu-*|debian-*)
+            NGINX_PACKAGES="nginx"
+            NGINX_DEFAULT_SERVER=/etc/nginx/sites-available/default
+            ;;
+        arch-*)
+            NGINX_PACKAGES="nginx-mainline"
+            ;;
+        fedora-*)
+            NGINX_PACKAGES="nginx"
+            ;;
+        *)
+            err_msg "$DIST_ID-$DIST_VERS: nginx not yet implemented"
+            ;;
+    esac
+}
+nginx_distro_setup
+
+install_nginx(){
+    info_msg "installing nginx ..."
+    pkg_install "${NGINX_PACKAGES}"
+    case $DIST_ID-$DIST_VERS in
+        arch-*|fedora-*)
+            systemctl enable nginx
+            systemctl start nginx
+            ;;
+    esac
+}
+
+nginx_is_installed() {
+    command -v nginx &>/dev/null
+}
+
+nginx_reload() {
+
+    info_msg "reload nginx .."
+    echo
+    if ! nginx -t; then
+       err_msg "testing nginx configuration failed"
+       return 42
+    fi
+    systemctl restart nginx
+}
+
+nginx_install_app() {
+
+    # usage:  nginx_install_app [<template option> ...] <myapp>
+    #
+    # <template option>:   see install_template
+
+    local template_opts=()
+    local pos_args=("$0")
+
+    for i in "$@"; do
+        case $i in
+            -*) template_opts+=("$i");;
+            *)  pos_args+=("$i");;
+        esac
+    done
+
+    nginx_include_apps_enabled "${NGINX_DEFAULT_SERVER}"
+
+    install_template "${template_opts[@]}" \
+                     "${NGINX_APPS_AVAILABLE}/${pos_args[1]}" \
+                     root root 644
+    nginx_enable_app "${pos_args[1]}"
+    info_msg "installed nginx app: ${pos_args[1]}"
+}
+
+nginx_include_apps_enabled() {
+
+    # Add the *NGINX_APPS_ENABLED* infrastruture to a nginx server block.  Such
+    # infrastruture is already known from fedora, including apps (location
+    # directives) from the /etc/nginx/default.d folder into the *default* nginx
+    # server.
+
+    # usage: nginx_include_apps_enabled <config-file>
+    #
+    #   config-file: Config file with server directive in.
+
+    [[ -z $1 ]] && die_caller 42 "missing argument <config-file>"
+    local server_conf="$1"
+
+    # include /etc/nginx/default.d/*.conf;
+    local include_directive="include ${NGINX_APPS_ENABLED}/*.conf;"
+    local include_directive_re="^\s*include ${NGINX_APPS_ENABLED}/\*\.conf;"
+
+    info_msg "checking existence: '${include_directive}' in file  ${server_conf}"
+    if grep "${include_directive_re}" "${server_conf}"; then
+        info_msg "OK, already exists."
+        return
+    fi
+
+    info_msg "add missing directive: '${include_directive}'"
+    cp "${server_conf}" "${server_conf}.bak"
+
+    (
+        local line
+        local stage=0
+        while IFS=  read -r line
+        do
+            echo "$line"
+            if [[ $stage = 0 ]]; then
+                if [[ $line =~ ^[[:space:]]*server*[[:space:]]*\{ ]]; then
+                    stage=1
+                fi
+            fi
+
+            if [[ $stage = 1 ]]; then
+                echo "        # Load configuration files for the default server block."
+                echo "        $include_directive"
+                echo ""
+                stage=2
+            fi
+        done < "${server_conf}.bak"
+    ) > "${server_conf}"
+
+}
+
+nginx_remove_app() {
+
+    # usage:  nginx_remove_app <myapp.conf>
+
+    info_msg "remove nginx app: $1"
+    nginx_dissable_app "$1"
+    rm -f "${NGINX_APPS_AVAILABLE}/$1"
+}
+
+nginx_enable_app() {
+
+    # usage:  nginx_enable_app <myapp.conf>
+
+    local CONF="$1"
+
+    info_msg "enable nginx app: ${CONF}"
+    mkdir -p "${NGINX_APPS_ENABLED}"
+    rm -f "${NGINX_APPS_ENABLED}/${CONF}"
+    ln -s "${NGINX_APPS_AVAILABLE}/${CONF}" "${NGINX_APPS_ENABLED}/${CONF}"
+    nginx_reload
+}
+
+nginx_dissable_app() {
+
+    # usage:  nginx_disable_app <myapp.conf>
+
+    local CONF="$1"
+
+    info_msg "disable nginx app: ${CONF}"
+    rm -f "${NGINX_APPS_ENABLED}/${CONF}"
+    nginx_reload
+}
+
+
 # Apache
 # ------
 

utils/lxc.sh

@@ -73,9 +73,7 @@ usage() {
 # ----------------------------------------------------------------------------
     _cmd="$(basename "$0")"
     cat <<EOF
-
 usage::
-
   $_cmd build        [containers|<name>]
   $_cmd copy         [images]
   $_cmd remove       [containers|<name>|images]
@@ -101,7 +99,7 @@ show
   :suite:        show services of all (or <name>) containers from the LXC suite
   :images:       show information of local images
 cmd
-  use single qoutes to evaluate in container's bash, e.g. 'echo $(hostname)'
+  use single qoutes to evaluate in container's bash, e.g.: 'echo \$(hostname)'
   --             run command '...' in all containers of the LXC suite
   :<name>:       run command '...' in container <name>
 install
@@ -151,14 +149,14 @@ main() {
     fi
 
     case $1 in
-        --source-only)  ;;
+        --getenv)  var="$2"; echo "${!var}"; exit 0;;
         -h|--help) usage; exit 0;;
 
         build)
             sudo_or_exit
             case $2 in
                 ${LXC_HOST_PREFIX}-*) build_container "$2" ;;
-                ''|containers) build_all_containers ;;
+                ''|--|containers) build_all_containers ;;
                 *) usage "$_usage"; exit 42;;
             esac
             ;;
@@ -171,7 +169,7 @@ main() {
         remove)
             sudo_or_exit
             case $2 in
-                ''|containers) remove_containers ;;
+                ''|--|containers) remove_containers ;;
                 images) lxc_delete_images_localy ;;
                 ${LXC_HOST_PREFIX}-*)
                     ! lxc_exists "$2" && usage_containers "unknown container: $2" && exit 42
@@ -185,7 +183,7 @@ main() {
         start|stop)
             sudo_or_exit
             case $2 in
-                ''|containers)  lxc_cmd "$1" ;;
+                ''|--|containers)  lxc_cmd "$1" ;;
                 ${LXC_HOST_PREFIX}-*)
                     ! lxc_exists "$2" && usage_containers "unknown container: $2" && exit 42
                     info_msg "lxc $1 $2"
@@ -203,7 +201,7 @@ main() {
                             lxc exec -t "$3" -- "${LXC_REPO_ROOT}/utils/lxc.sh" __show suite \
                                 | prefix_stdout "[${_BBlue}$3${_creset}]  "
                         ;;
-                        *) show_suite;;
+                        *|--) show_suite;;
                     esac
                     ;;
                 images) show_images ;;
@@ -213,7 +211,7 @@ main() {
                             ! lxc_exists "$3" && usage_containers "unknown container: $3" && exit 42
                             lxc config show "$3" | prefix_stdout "[${_BBlue}${3}${_creset}] "
                         ;;
-                        *)
+                        *|--)
                             rst_title "container configurations"
                             echo
                             lxc list "$LXC_HOST_PREFIX-"
@@ -228,7 +226,7 @@ main() {
                             ! lxc_exists "$3" && usage_containers "unknown container: $3" && exit 42
                             lxc info "$3" | prefix_stdout "[${_BBlue}${3}${_creset}] "
                             ;;
-                        *)
+                        *|--)
                             rst_title "container info"
                             echo
                             lxc_cmd info
@@ -267,7 +265,7 @@ main() {
                             ! lxc_exists "$3" && usage_containers "unknown container: $3" && exit 42
                             lxc_exec_cmd "$3" "${LXC_REPO_ROOT}/utils/lxc.sh" __install "$2"
                             ;;
-                        '') lxc_exec "${LXC_REPO_ROOT}/utils/lxc.sh" __install "$2" ;;
+                        ''|--) lxc_exec "${LXC_REPO_ROOT}/utils/lxc.sh" __install "$2" ;;
                         *) usage_containers "unknown container: $3" && exit 42
                     esac
                     ;;

utils/morty.sh

@@ -47,6 +47,7 @@ CONFIG_FILES=()
 # Apache Settings
 
 APACHE_MORTY_SITE="morty.conf"
+NGINX_MORTY_SITE="morty.conf"
 
 # ----------------------------------------------------------------------------
 usage() {
@@ -54,9 +55,7 @@ usage() {
 
     # shellcheck disable=SC1117
     cat <<EOF
-
 usage::
-
   $(basename "$0") shell
   $(basename "$0") install    [all|user]
   $(basename "$0") update     [morty]
@@ -66,6 +65,7 @@ usage::
   $(basename "$0") inspect    [service]
   $(basename "$0") option     [debug-on|debug-off]
   $(basename "$0") apache     [install|remove]
+  $(basename "$0") nginx      [install|remove]
   $(basename "$0") info       [searx]
 
 shell
@@ -86,6 +86,9 @@ option
 apache : ${PUBLIC_URL_MORTY}
   :install: apache site with a reverse proxy (ProxyPass)
   :remove:  apache site ${APACHE_MORTY_SITE}
+nginx (${PUBLIC_URL_MORTY})
+  :install: nginx site with a reverse proxy (ProxyPass)
+  :remove:  nginx site ${NGINX_MORTY_SITE}
 
 If needed, set the environment variables in the '${DOT_CONFIG#"$REPO_ROOT/"}' file::
   PUBLIC_URL_MORTY:     ${PUBLIC_URL_MORTY}
@@ -122,8 +125,6 @@ EOF
 }
 
 main() {
-    rst_title "$SERVICE_NAME" part
-
     required_commands \
         sudo install git wget curl \
         || exit
@@ -131,7 +132,7 @@ main() {
     local _usage="ERROR: unknown or missing $1 command $2"
 
     case $1 in
-        --source-only)  ;;
+        --getenv)  var="$2"; echo "${!var}"; exit 0;;
         -h|--help) usage; exit 0;;
 
         shell)
@@ -147,6 +148,7 @@ main() {
                 *) usage "$_usage"; exit 42;;
             esac ;;
         install)
+            rst_title "$SERVICE_NAME" part
             sudo_or_exit
             case $2 in
                 all) install_all ;;
@@ -185,6 +187,13 @@ main() {
                 remove) remove_apache_site ;;
                 *) usage "$_usage"; exit 42;;
             esac ;;
+        nginx)
+            sudo_or_exit
+            case $2 in
+                install) install_nginx_site ;;
+                remove) remove_nginx_site ;;
+                *) usage "$_usage"; exit 42;;
+            esac ;;
         info)
             case $2 in
                 searx) info_searx ;;
@@ -348,8 +357,8 @@ EOF
         wait_key
     fi
 
-    if ! service_is_available "${PUBLIC_URL}"; then
+    if ! service_is_available "${PUBLIC_URL_MORTY}"; then
-        warn_msg "Public service at ${PUBLIC_URL} is not available!"
+        warn_msg "Public service at ${PUBLIC_URL_MORTY} is not available!"
         if ! in_container; then
             warn_msg "Check if public name is correct and routed or use the public IP from above."
         fi
@@ -363,7 +372,7 @@ EOF
     fi
 
     local _debug_on
-    if ask_yn "Enable filtron debug mode (needs reinstall of systemd service)?"; then
+    if ask_yn "Enable morty debug mode (needs reinstall of systemd service)?"; then
         enable_debug
         _debug_on=1
     else
@@ -436,6 +445,50 @@ This removes apache site ${APACHE_MORTY_SITE}."
     apache_remove_site "$APACHE_MORTY_SITE"
 }
 
+install_nginx_site() {
+
+    rst_title "Install nginx site $NGINX_MORTY_SITE"
+
+    rst_para "\
+This installs a reverse proxy (ProxyPass) into nginx site (${NGINX_MORTY_SITE})"
+
+    ! nginx_is_installed && err_msg "nginx is not installed."
+
+    if ! ask_yn "Do you really want to continue?" Yn; then
+        return
+    else
+        install_nginx
+    fi
+
+    "${REPO_ROOT}/utils/searx.sh" install uwsgi
+
+    SEARX_SRC=$("${REPO_ROOT}/utils/searx.sh" --getenv SEARX_SRC)
+    SEARX_URL_PATH=$("${REPO_ROOT}/utils/searx.sh" --getenv SEARX_URL_PATH)
+    nginx_install_app "${NGINX_MORTY_SITE}"
+
+    info_msg "testing public url .."
+    if ! service_is_available "${PUBLIC_URL_MORTY}"; then
+        err_msg "Public service at ${PUBLIC_URL_MORTY} is not available!"
+    fi
+}
+
+remove_nginx_site() {
+
+    rst_title "Remove nginx site $NGINX_MORTY_SITE"
+
+    rst_para "\
+This removes nginx site ${NGINX_MORTY_SITE}."
+
+    ! nginx_is_installed && err_msg "nginx is not installed."
+
+    if ! ask_yn "Do you really want to continue?" Yn; then
+        return
+    fi
+
+    nginx_remove_site "$NGINX_MORTY_SITE"
+
+}
+
 rst-doc() {
 
     eval "echo \"$(< "${REPO_ROOT}/docs/build-templates/morty.rst")\""

utils/searx.sh

@@ -114,9 +114,7 @@ usage() {
 
     # shellcheck disable=SC1117
     cat <<EOF
-
 usage::
-
   $(basename "$0") shell
   $(basename "$0") install    [all|user|searx-src|pyenv|uwsgi|packages|buildhost]
   $(basename "$0") update     [searx]
@@ -178,8 +176,6 @@ EOF
 }
 
 main() {
-    rst_title "$SEARX_INSTANCE_NAME" part
-
     required_commands \
         sudo systemctl install git wget curl \
         || exit
@@ -187,9 +183,8 @@ main() {
     local _usage="unknown or missing $1 command $2"
 
     case $1 in
-        --source-only)  ;;
+        --getenv)  var="$2"; echo "${!var}"; exit 0;;
         -h|--help) usage; exit 0;;
-
         shell)
             sudo_or_exit
             interactive_shell "${SERVICE_USER}"
@@ -203,6 +198,7 @@ main() {
                 *) usage "$_usage"; exit 42;;
             esac ;;
         install)
+            rst_title "$SEARX_INSTANCE_NAME" part
             sudo_or_exit
             case $2 in
                 all) install_all ;;

utils/templates/etc/nginx/default.apps-available/morty.conf

@@ -0,0 +1,11 @@
+# https://example.org/morty
+
+location /morty {
+    proxy_pass         http://127.0.0.1:3000/;
+
+    proxy_set_header   Host             \$http_host;
+    proxy_set_header   Connection       \$http_connection;
+    proxy_set_header   X-Real-IP        \$remote_addr;
+    proxy_set_header   X-Forwarded-For  \$proxy_add_x_forwarded_for;
+    proxy_set_header   X-Scheme         \$scheme;
+}

utils/templates/etc/nginx/default.apps-available/searx.conf:filtron

@@ -0,0 +1,16 @@
+# https://example.org/searx
+
+location ${SEARX_URL_PATH} {
+    proxy_pass         http://127.0.0.1:4004/;
+
+    proxy_set_header   Host             \$http_host;
+    proxy_set_header   Connection       \$http_connection;
+    proxy_set_header   X-Real-IP        \$remote_addr;
+    proxy_set_header   X-Forwarded-For  \$proxy_add_x_forwarded_for;
+    proxy_set_header   X-Scheme         \$scheme;
+    proxy_set_header   X-Script-Name    ${SEARX_URL_PATH};
+}
+
+location ${SEARX_URL_PATH}/static {
+    alias ${SEARX_SRC}/searx/static;
+}